Can bagged fertilizer sit on drive-in rails?

Yes, on a sound pallet with boards that span the rails. We check pallet type and load weight before setting rail spacing.

Will lanes fit a small Kerman building?

Often. Dense blocks work in modest footprints because they remove aisles. Low clear height limits levels, not the concept.

How does seasonal drawdown affect lane use?

Lanes fill before the season and empty gradually. If many SKUs draw down unevenly, shallower lanes or pushback may waste less space.

What forklift details do you need?

Model, mast height, overhead guard height and overall width. Those numbers set lane openings and rail heights.

Kerman, California

Drive-In Rack in Kerman, CA

Drive-in rack in Kerman suits agricultural supply yards that buy fertilizer, seed or irrigation stock in volume ahead of the growing season. Businesses along Whitesbridge Avenue and SR-145 often stock deep quantities of a short product list.

Bagged material on pallets stacks poorly once it settles. Putting those loads on rails keeps the bags off one another, and removing aisles leaves more of a modest building for actual storage.

Picture a Kerman supply yard taking delivery of a full season's fertilizer before planting. Without drive-in rack, those pallets cover the floor and block the counter. With a lane block along one wall, the same stock sits on rails several levels high, leaving room for walk-in customers and order staging.

(559) 620-5206

Drive-In Racking Basics for Bagged Inputs

Bag pallets can sag, so pallet base and rail position deserve close attention. Kerman metal buildings sometimes have girts or braces near the walls. We keep the block clear of those members and confirm the slab area chosen for the lanes is free of trenches or drains.

Lane entry

Drivers enter each lane and set pallets on rails at the chosen level, working from the back toward the face.

LIFO flow

The last pallet placed is the first one removed. For stable products like fertilizer or fittings, that rarely causes trouble.

Pallet base

Bags can droop between bottom boards. Sound pallets and correct rail spacing keep loads from sagging.

Versus pushback

Pushback keeps two to six pallets with no truck entry. For deeper reserves of one product, lanes hold more per footprint.

Getting a Kerman Layout Drawn

Send peak pallet counts, product mix, load weights, pallet style and your forklift details. A phone photo of the building interior and door positions is plenty to start.

Assembly is carried out by experienced installation crews we schedule and manage, and the frames are anchored to the floor. We plan the work before the pre-season buying rush.

Drive-in racking is less helpful for small irrigation fittings and parts sold by the box. Those belong in selective rack or shelving. We usually draw both on one plan so you can see how the building divides. If deliveries arrive with a truck-mounted forklift, tell us its dimensions too, because it may need to place pallets at the lane face. Drive-in rack lanes are sized for the trucks that will actually enter, not a generic model.

Our Kerman service area page and drive-in rack overview cover more. Smaller reserves may fit Kerman pushback rack, and dated inputs could suit Kerman pallet flow.

Pre-season fertilizer and seed

Bagged material

Smaller metal buildings

Call (559) 620-5206

Kerman Ag Supply and Drive-In Pallet Rack

West-side suppliers serve farms out toward I-5. Pre-season buying creates a spike, then the stock draws down steadily. Lanes absorb the spike without needing a second building.

Many Kerman buildings are smaller metal structures with modest clear heights. We plan levels to the exact measured height, so no space is wasted overhead.

As a division of Warehouse Equipment & Supplies Co., our team has supplied and installed racking since 1997, including many farm-supply layouts like these.

Drive-in pallet rack also reduces handling. Each product lives in one lane, so staff pull from a single face instead of searching through floor stacks.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Whitesbridge Avenue Yards and SR-145 Deliveries

Supply trucks on SR-145 and customer pickups off Whitesbridge Avenue often share one door. The block should leave a clear apron for both.

Agricultural supplies

Food processing

Farm equipment support

Recent Installations

Racking projects completed for warehouses across Fresno and the Central Valley.

View More Projects

Get a Drive-In Rack Quote for Your Kerman Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (559) 620-5206.

Fresno Pallet Racks

5730 N First St

Ste 105 #252

Fresno, CA 93710

(559) 620-5206

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Fresno Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.