Would packaging pallets and mixed parts share a lane?

They should not share a lane when the parts need independent retrieval. Keep repeated packaging together and give low-volume components separate selective positions; that division avoids unloading reserve stock just to reach a production item.

What determines two-deep versus four-deep storage?

Your regular pallets per SKU determine the starting depth. For a Clovis production store, compare the quantity remaining after a normal issue cycle as well as the quantity received, so lane occupancy reflects ordinary work rather than an occasional bulk delivery.

Can the current beams be retained for an addition?

Only after their span, connections and rated loading are checked with the proposed cart system. Frame depth and the supporting uprights also matter; a matching-looking beam is not evidence of compatibility.

How much room must the forklift have in front?

Use the truck manufacturer’s turning and load-handling requirements with your actual pallet overhang. Include room to align squarely with the lane and retain the production crossings shown on the layout instead of selecting an aisle width from a generic example.

Clovis, California

Pushback Rack in Clovis, CA

Pushback rack in Clovis should earn its floor space by holding repeated pallets, not by hiding a wide assortment of parts behind one pick face. Light manufacturing and fulfillment buildings near Shaw Avenue often need reserve packaging beside directly accessible production supplies. A deeper reserve block can release aisle floor without moving the daily parts picks into inaccessible lanes.

Start with the quantity of each item normally held between replenishments. Push back racking accommodates two to six pallets in depth, but the useful depth depends on that recurring quantity. An impressive position count means little when half the lanes sit partly occupied and production staff still have nowhere to stage incoming work.

(559) 620-5206

Pushback Rack Planned Around Production Access

For a Herndon Avenue operation, the layout conversation should include where components arrive, where packaging waits, and how finished orders reach dispatch. Those movements determine which aisles can disappear and which crossings must stay open. We examine the reserve block alongside the workstations rather than treating storage as a separate rectangle on the drawing.

Clovis Industrial Park and the SR-168 corridor support different combinations of manufacturing and distribution. A building serving both functions may benefit from short reserve lanes next to selective positions for low-volume supplies. Sorting inventory by handling pattern prevents a slow-moving part from occupying the front of a lane needed for repeated cartons.

As a division of Warehouse Equipment & Supplies Co., we draw on a business supplying and installing since 1997. Our role is to turn your pallet records and building measurements into a purchase decision you can explain: which items gain dense storage, which stay directly reachable, and what installation work is included.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

High-density pushback rack lanes loaded with pallets

Pushback pallet racking showing cart rails and load beams

Packaging Reserve Beside Working Departments

Shaw Avenue receiving access and Herndon Avenue production movements help define where light-manufacturing reserve ends and open working floor begins.

Light manufacturing

Parts distribution

Order fulfillment

How Pushback Pallet Rack Handles Repeat Loads

The cart assembly carries the load; the driver works at the aisle face rather than travelling down a storage tunnel.

Nested support

Wheeled carts nest together on inclined rails. A pallet placed at the front displaces the loaded carts behind it, provided the specified pallet base and load footprint suit the assembly.

Controlled return

When the leading pallet is withdrawn, the remaining loads advance toward the aisle under gravity. Operators control that movement through the handling method demonstrated for the selected system.

Rotation choice

LIFO describes the lane sequence: the latest receipt leaves first. Items needing strict arrival-order retrieval belong in a different arrangement, even if their pallet quantities appear suitable for deep storage.

Frame and beam checks

Beam span, upright height, frame depth and total bay loading must be considered together. The rating of a single cart does not establish what the complete supporting structure can carry.

Sizing Pushback Rack and Its Installation Scope

Send an inventory sample showing pallets per item, the heaviest load, pallet dimensions and normal receipt sizes. Include your forklift model and existing bay measurements. We compare alternative lane lengths against available pick faces, then show the resulting usable positions rather than multiplying the deepest option across the entire floor.

A conversion needs more than adding rails to spare beams. We identify the existing rack manufacturer, connection style, frame depth and ratings before deciding whether any bays can support the proposed equipment. New material is specified for the addition. Where the existing row is unsuitable, a separate block can preserve the current selective storage without forcing incompatible connections.

The written scope identifies frames, beams, carts, rails, floor anchoring and installation responsibilities. Experienced installation crews we schedule and manage work within agreed staging zones, with pallet travel checked before handover. Review the Clovis service area and our pushback rack product page; compare Clovis pallet flow for arrival-order stock or Clovis drive-in rack for larger uniform reserves.

Recurring packaging quantities

Separate access for small parts

Reserve lanes beside manufacturing

Call (559) 620-5206

Recent Installations

Racking projects completed for warehouses across Fresno and the Central Valley.

View More Projects

Get a Pushback Rack Quote for Your Clovis Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (559) 620-5206.

Fresno Pallet Racks

5730 N First St

Ste 105 #252

Fresno, CA 93710

(559) 620-5206

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Fresno Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.