Which pallets belong in flow lanes instead of selective rack?

High-volume SKUs received repeatedly, where older stock must ship first, are the natural fit. A Clovis parts store with dozens of slow movers keeps those in selective positions and dedicates pallet flow racking lanes only to the items that justify depth.

Can one lane hold different products at different times?

Yes, provided the pallet dimensions and weights stay within the tested range and staff reassign lanes deliberately. Record the changeover so an earlier production date is never loaded behind a later one.

What happens if a pallet hangs up mid-lane?

Operators follow the clearing procedure for the specified system, which usually means gentle intervention from the pick face with the lane isolated. Pallet acceptance standards at receiving prevent most hang-ups before they occur.

How long are the lanes for a typical installation?

Lane length follows your per-SKU quantity between receipts and the building geometry, commonly from a few pallets deep to a dozen or more. We size lanes from your inventory records rather than quoting the deepest option available.

Pallet Flow Rack warehouse storage system

Clovis, California

Pallet Flow Rack in Clovis, CA

Pallet flow rack in Clovis gives date-sensitive parts and packaged stock a physical first-in, first-out path instead of a stack of reminders on a clipboard. Light manufacturing and fulfillment buildings along Shaw Avenue often receive components in waves, then issue them in the order production consumes them. Gravity-fed lanes load from one aisle and present pallets at the opposite face, keeping fresh receipts behind earlier arrivals.

Pallet flow racking is not a universal answer for every pallet in the building. Slow movers and mixed assortments still belong in directly accessible selective rows. The lanes earn their footprint when a handful of high-volume SKUs arrive repeatedly and must rotate without a forklift shuttling pallets between positions.

(559) 620-5206

Clovis Pallet Flow Rack for Production-Side Rotation

A Herndon Avenue assembly operation usually asks the same question in different words: how do we stop newer components from burying older ones? We start with your receipt records and issue frequency, because lane depth follows the quantity of each SKU held between deliveries, not the empty floor that happens to be available.

Near the SR-168 corridor, buildings range from newer tilt-wall distribution space to older lower-clear warehouses, and that changes the math. Taller clear heights can accept deeper multi-level lanes, while a lower roof may argue for fewer levels and a wider pick face. We measure the actual building before drawing anything.

Fresno Pallet Racks is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. We put the inventory assumptions, component selections and installation responsibilities in writing so purchasing and operations review the same proposal.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Shaw Avenue Receiving and Production Issue Points

Shaw Avenue receiving access, Herndon Avenue production areas and SR-168 distribution traffic shape where pallets enter storage and where issued loads leave for assembly lines and outbound staging.

Light manufacturing

Parts distribution

Order fulfillment

How Pallet Flow Racking Moves Clovis Loads

A gravity flow rack lane is a controlled conveyor without a motor; rollers, slope and braking hardware decide whether your pallets travel smoothly or stall.

Roller contact

Wheel or roller tracks must match the underside of your actual pallets, including board direction, spacing and any load overhang. Bring damaged or inconsistent pallets under control before they enter the lane.

Speed control

Brake rollers and speed controllers govern descent so a heavy pallet does not race and a light one does not hang up. Selection follows the lightest and heaviest loads you expect, verified with sample travel tests.

Depth and slope

Lane length and pitch come from the pallet dimensions, weights and the chosen system, not a generic angle copied from another building. Deeper lanes need more vertical fall at every level, which affects overall rack height.

Pick-face separation

A pallet separator can hold back the trailing load so the front pallet lifts free without pressure behind it. Confirm the separator arrangement during the demonstration, with your forklift and your operators.

Planning a Clovis Pallet Flow Rack Installation

Send pallet photos and dimensions, the lightest and heaviest load weights, and the receipt quantities for each SKU you expect to dedicate to pallet flow rack lanes. Include forklift models and your usable clear height. We compare occupied positions after normal withdrawals, because a deep lane that sits half empty still consumes its whole footprint.

New material is specified for the lanes, frames and beams, and the structure is anchored to the floor. Experienced installation crews we schedule and manage work from an agreed staging area, with loaded travel checked using your pallets before handover. Summer heat shapes staging and shift timing in non-air-conditioned buildings.

Review the Clovis service area and the pallet flow rack product page before our consultation. Where stock can ship in last-in order, compare Clovis pushback lanes; for case picking beneath pallet reserve, see Clovis carton flow. Request a scoped proposal at (559) 620-5206.

Repeated parts and packaging SKUs

Date-coded packaged goods

Separate load and pick aisles

Call (559) 620-5206

Recent Installations

Racking projects completed for warehouses across Fresno and the Central Valley.

View More Projects

Get a Pallet Flow Rack Quote for Your Clovis Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (559) 620-5206.

Fresno Pallet Racks

5730 N First St

Ste 105 #252

Fresno, CA 93710

(559) 620-5206

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Fresno Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.