--- title: "Cantilever Rack in Sanger, CA | Manufacturing Racks" url: https://fresnopalletracks.com/service-area/sanger/cantilever-rack description: "Sanger cantilever rack for manufacturing stock and long parts near Academy Ave and SR-180. Free design consultation. Call (559) 620-5206." lang: en --- Image: Cantilever Rack warehouse storage system (https://fresnopalletracks.com/__l5e/assets-v1/ba04f773-32bb-4670-92f4-e8719ff95de7/cantilever-hero.jpg) Sanger, California # Cantilever Rack in Sanger, CA Cantilever rack in Sanger serves manufacturers and fruit packers along Academy Avenue and State Route 180 that keep tube, channel, pipe and sheet near production. Lean those against a wall and they bend, tip and cost time. Arms on a line of uprights hold each profile flat and labeled, with an open face toward the aisle. Sanger manufacturers along Academy Avenue handle steel daily, and the cleanest shops I see keep every profile on arms near the saw. (559) 620-5206 ## Sanger Manufacturing Floors and Cantilever Racking Metal fabricators in Sanger often move material from receiving to the saw to the welding bay. Placing a double-sided run between receiving and saw shortens each trip. Fruit packers near the Sanger Depot area store line parts and lumber. Those buildings are older, so short runs with few levels suit them. Agricultural processors near SR-180 also need long storage for line parts and lumber. Their buildings tend to be lower and older, so a single-sided cantilever rack along one wall usually fits better than a freestanding run in the middle of the floor. Fresno Pallet Racks is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Cantilever warehouse racking holding steel tubing (https://fresnopalletracks.com/__l5e/assets-v1/8364575f-189e-4295-92e9-8b17c748becb/cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://fresnopalletracks.com/__l5e/assets-v1/4a69e7b9-3920-4b64-a3a6-b09eee0bcf78/cantilever-3b.jpg) ### Material Flow on Academy Avenue Fabrication shops on Academy Avenue and packers near the Sanger Depot area move long stock from SR-180 receiving to cutting and line maintenance. Fruit packing Agricultural processing Manufacturing ## Selecting a Cantilever Storage Rack Series Three duty levels cover most manufacturing stock. 1 ### Light duty Trim, aluminum extrusion and thin-wall tube. 2 ### Medium duty Channel, angle and mid-weight pipe. 3 ### Heavy duty Solid bar, heavy wall pipe and plate bundles. 4 ### Mixed runs Heavier arms low, lighter arms high on the same columns. ## How Sanger Cantilever Rack Projects Run Send the profiles you stock with lengths and bundle weights. We group them into length bands and assign levels. We check forklift capacity at height with long loads, since the truck rating also limits how high arms should go. Arm spacing matters more than people think. Thin-wall tube and aluminum extrusion bend between supports that are too far apart, while heavy bar spans wider gaps easily. We set spacing per profile so nothing bows. Single or double sided is the next choice. Double-sided cantilever racking doubles storage per column but needs aisles on both faces; single sided fits against walls and saves aisle space in narrow buildings. Heat in non-air-conditioned Sanger shops shapes installation planning. Crews schedule work for cooler parts of the day and keep the production floor clear, so the shop can keep running while the cantilever storage rack goes in. Selective pallet rack still makes sense for boxed hardware and consumables near the same work area. One more check for Sanger fabricators: forklift reach. Long material carried high sways, and operators slow down. Keeping the cantilever rack to a sensible number of levels usually makes the shop faster overall. A cantilever storage rack also benefits from clear capacity labels on each level, so operators know the arm limit before they set a heavy bundle down. We include those labels with every run. Combined with straight aisles and sorted length bands, they make the steel area one of the easiest parts of the shop to manage, even for new operators. Every quote lists columns, arms, braces, floor anchoring and installation by experienced installation crews we schedule and manage. Compare the Sanger service area (https://fresnopalletracks.com/service-area/sanger), the cantilever rack product page (https://fresnopalletracks.com/products/cantilever-rack), Sanger pallet flow rack (https://fresnopalletracks.com/service-area/sanger/pallet-flow-rack) and Sanger drive-in rack (https://fresnopalletracks.com/service-area/sanger/drive-in-rack). Tube, channel and angle Sheet near cutting stations Packing line lumber Call (559) 620-5206: (559) 620-5206 ## Recent Installations Racking projects completed for warehouses across Fresno and the Central Valley. Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://fresnopalletracks.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://fresnopalletracks.com/projects ## Get a Cantilever Rack Quote for Your Sanger Warehouse Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (559) 620-5206. ### Fresno Pallet Racks 5730 N First St Ste 105 #252 Fresno, CA 93710 (559) 620-5206 Monday - Friday: 8:00 AM - 6:00 PM ## Sanger Long-Load Rack FAQs ### Which series fits a Sanger fabrication shop? ### Can sheet stock go on cantilever arms? ### Does forklift capacity limit arm height? ### Is the quote just steel? ## Other Rack Types We Supply in Sanger ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://fresnopalletracks.com/service-area/sanger ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://fresnopalletracks.com/service-area/sanger/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://fresnopalletracks.com/service-area/sanger/pallet-flow-rack ### Drive-In Rack Deep storage lanes replace individual access aisles; the forklift enters the structure to handle bulk pallets. View details https://fresnopalletracks.com/service-area/sanger/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://fresnopalletracks.com/service-area/sanger/carton-flow-rack ### Warehouse Relocation Teardown, labeling, transport coordination, and reinstallation of pallet rack and warehouse storage systems at your new building. View details https://fresnopalletracks.com/service-area/sanger/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers Fresno and the Central Valley, so one team can handle multiple buildings for the same company. Cantilever Rack in Fresno: https://fresnopalletracks.com/service-area/fresno/cantilever-rack Cantilever Rack in Clovis: https://fresnopalletracks.com/service-area/clovis/cantilever-rack Cantilever Rack in Madera: https://fresnopalletracks.com/service-area/madera/cantilever-rack Cantilever Rack in Visalia: https://fresnopalletracks.com/service-area/visalia/cantilever-rack Cantilever Rack in Selma: https://fresnopalletracks.com/service-area/selma/cantilever-rack Cantilever Rack in Kingsburg: https://fresnopalletracks.com/service-area/kingsburg/cantilever-rack View All Service Areas: https://fresnopalletracks.com/service-area ## Where We Work Located in Fresno, we serve the entire Central Valley with industrial pallet racks and warehouse storage solutions. ### Fresno Pallet Racks #### Address 5730 N First St Ste 105 #252 Fresno, CA 93710 #### Phone (559) 620-5206 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Sanger? Call (559) 620-5206 or request a quote and we will get a layout started. (559) 620-5206 Tap to Call: (559) 620-5206 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://fresnopalletracks.com/#business", "name": "Fresno Pallet Racks", "url": "https://fresnopalletracks.com", "telephone": "(559) 620-5206", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "5730 N First St, Ste 105 #252", "addressLocality": "Fresno", "addressRegion": "CA", "postalCode": "93710", "addressCountry": "US" }, "hasMap": "https://www.google.com/maps?q=Fresno+Pallet+Racks,+5730+N+First+St+Ste+105+%23252,+Fresno,+CA+93710&output=embed&z=15", "areaServed": [ { "@type": "City", "name": "Fresno", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Clovis", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Madera", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Visalia", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Selma", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Kingsburg", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Sanger", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Reedley", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Kerman", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Tulare", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Hanford", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Merced", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Los Banos", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Porterville", "containedInPlace": { "@type": "State", "name": "California" } }, { "@type": "City", "name": "Fowler", "containedInPlace": { "@type": "State", "name": "California" } } ] }, { "@type": "Service", "@id": "https://fresnopalletracks.com/service-area/sanger/cantilever-rack#service", "name": "Cantilever Rack in Sanger, CA", "serviceType": "Cantilever Rack", "url": "https://fresnopalletracks.com/service-area/sanger/cantilever-rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "provider": { "@id": "https://fresnopalletracks.com/#business" }, "areaServed": { "@type": "City", "name": "Sanger", "containedInPlace": { "@type": "State", "name": "California" } }, "image": "https://fresnopalletracks.com/__l5e/assets-v1/ba04f773-32bb-4670-92f4-e8719ff95de7/cantilever-hero.jpg" } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://fresnopalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://fresnopalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Sanger", "item": "https://fresnopalletracks.com/service-area/sanger" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://fresnopalletracks.com/service-area/sanger/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Which series fits a Sanger fabrication shop?", "acceptedAnswer": { "@type": "Answer", "text": "Usually medium or heavy duty, based on your heaviest bundle. Light duty fits only extrusions and trim." } }, { "@type": "Question", "name": "Can sheet stock go on cantilever arms?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, with enough arms to support the sheet without sag, or decking. Large sheets fit well with no front posts." } }, { "@type": "Question", "name": "Does forklift capacity limit arm height?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, rated capacity drops at height and with long loads. We set levels within what your truck handles." } }, { "@type": "Question", "name": "Is the quote just steel?", "acceptedAnswer": { "@type": "Answer", "text": "No, it can cover delivery, anchoring and installation. Installation is handled by crews we schedule and manage." } } ] } ] ```